How to clean and maintain the sensor faucet?

If we place our hands in the induction area of the sensor faucet, the water flow will automatically flow out. This is a sensor faucet designed with infrared sensing principle, this design is very convenient for life. How should the sensor faucet be cleaned and maintained in daily life? Today Xiao Bian has come for you.

One, sensor faucet cleaning:

1.Drift with only clean water, dry the faucet with a soft cotton cloth;

2. Do not use any abrasive cleaner, abrasive cloth or paper towel;

3. Do not use any acidic cleaners, abrasives, or harsh cleaners or soaps.

4. Use a mild, colorless glass cleaner, or a powder cleaner that does not grind and dissolve completely (and mix according to manufacturing instructions).

5, does not contain the abrasive liquid polish. After cleaning, please use water to remove all cleaning and dry it with a soft cotton cloth.

Second, the maintenance of sensor faucet:

1. Always wipe the appearance of the product with a clean, soft cloth.

2, to avoid the use of strong acid and alkali chemicals.

3, eliminate the use of wire ball or nylon ball to wipe the plating and plastic parts.

4, eliminate the hard material on the surface of the product scratches, strokes.

5, prevent water from flushing the product directly.

6. Keep the underside of the mesa dry to prevent it from getting wet for a long time.

7, DC series products, found that even if the sensor lights continue to flash, even if the battery is replaced.

8, regular cleaning of the filter to prevent clogging, affecting the normal use.

Third, usually pay attention to:

Usually can use car wax sprayed to the faucet surface after 3-5 minutes wipe, can maintain the brightness of the faucet sample;

It's best not to touch it directly with your hands. Because oil on your hands can easily touch the surface of the faucet, it is not easy to clean, affecting the finish.